Advancing Cladding Support Systems

Solving Today's Design Needs for Thermal Isolation,
Moisture Management and Insulation Securement

Smart. Simple. Limitless.

Where Clever Engineering Meets Maximum Design Flexibility.

One Complete System for All Cladding Materials

Terracotta, Stone, Brick, Ceramic, Fiber Cement, ACM, Composite, Zinc, +

EXTERIOR

CL 300

Tech ResourcesCEUsLEED

SLOTTED-Z

Tech Resources

ECO-Z

Tech Resources

VENTED-Z

Tech Resources

FlatTRACK

Tech Resources

INTERIOR

FlatTRACK

Tech Resources

CL 300

Thermally Isolated Adjustable
Cladding Support System

Rainscreen & ci Applications

CL 300 is a thermally isolated adjustable cladding support system that can bear the weight of any cladding material and it uniquely integrates the horizontal and vertical tracks for attachment on the same plane, making it easier and faster to install.

CL 300
Brochure

DOWNLOAD PDF

Components

All Cladding Materials

  • One Product Design
  • Integrates with All Cladding Materials & Weights
  • Terracotta, Stone, Brick, Ceramic, Fiber Cement,ACM, Composite, Zinc +++
  • Gravity Load: 61 lb/sq. ft.

Thermally Isolated

High-performance system for exterior use.

Colors Available

Aluminum Mill
(Standard)

Black Anodized
(Custom)

Level & Plumb

  • Level and Plumb on the Exterior Plane
  • No Shims at the Substrate
  • Less Potential Damage to the Membrane
  • One Adjustment – Insulation Depth + Plumb/Level
  • Steel Stud or Slab – Quickly Resolve In-field Imperfections

Finishing Accessories

Window, Door, Edge Termination

Creative Corner Designs

One Complete System that Does it All

High Thermal Performance

Third-party tested – 91% thermal efficiency. Efficient thermal break achieved with polyamide clips. LEED Design Credits: Energy & Atmosphere + Materials & Resources, +

Integrates with all Cladding Materials

Terracotta, Stone, Brick, Ceramic, Fiber Cement, ACM, Composite, Zinc, +

Universal Installation

Horizontal AND/OR Vertical.

Optional Horizontal Flush-mounts

Horizontal and vertical attachment layers imbed as an integrated solution for multi-point affixing of panels on the same plane. Minimizes extension of the cladding from the substrate.

Accuracy to Design

Integrated install measurements, leveling and minute adjusting capability.

Finishing Accessories

Address termination points for corners, windows & doors. Corners can be properly supported - including a wide range of acute and obtuse angles.

Insulation Accommodation

Accommodates up to 8” of insulation.

Aluminum & Polyamide Components

Lightweight and strong extruded aluminum Base-Track, T-Track, Flush-Mount Polyamide THERMAClip™ – strong material provides the thermal break

Customization

Custom track lengths and system depths available.

Track Colors

AluminumMill - Silver (Standard)BlackAnodized (Custom)

Global Responsibility

High Thermal Performance

Third-party thermal analysis by Morrison Hershfield

  • Results @ 91% thermal efficiency.
  • Thermal break achieved with polyamide clips.

LEED Building Design

The CL 300 cladding support system is an environmentally responsible product that provides high-performance thermal isolation required for effective continuous insulation design.

LEED Credits

Energy & Atmosphere

  • Exceeds ANSI/ASHRAE/IESNA Standard 90.1–2010 by eliminating any conductive fastener penetration of the insulation.

Materials & Resources

  • Aluminum elements have 30.5% post-consumer recycled content and may be valued at 85% of the cost of those elements in calculating the credit.

View the LEED Brochure for specific details.

Leadership in Energy & Environmental Design

DOWNLOAD PDF

Up to the Challenge

Rigorously Tested to Meet Challenging Conditions

All CL-TALON products are made with 100% aluminum alloy which is less corrosive than powder coated or heavier steel alternatives and can therefore extend the life of the façade, especially in high moisture or saline rich environments.

Third-party Fire, Water, Air, Structural & Gravity testing includes: NFPA 285, ASTM E331, ASTM E330, ASTM E283.

View our Technical Information for more details.

Technical
Data Sheet

DOWNLOAD PDF

Quick, Safe, Easy to Install.

Why Contractors Love Our Products

  • Pre-marked measurements etched into the face of Base Track.
  • Lessens shimming needed at the substrate – less time and potential damage to the membrane.
  • Greater depth and finite adjustments than other systems.
  • THERMAClip™ slides into the 10 ft Base Track saving time versus plumbing and leveling individual clips over a large space.
  • Optional pre-installed clip in location on the Base Track.
  • Aluminum material is strong and lightweight.

    SLOTTED-Z

    SLOTTED-Z combines known industry practices with advancements in both thermal performance and insulation securement that will save energy and labor costs. Available in fiberglass or aluminum.

    SLOTTED-Z
    Brochure

    DOWNLOAD PDF

    SLOTTED-Z with ROCKETStick

    Z-Girt with Insulation Securement

    • Advancement in thermalPerformance
    • Secure insulation faster than everbeforeusing the insulationsecurement slots andROCKETStickTM.
    • Available in fiberglass oraluminum.

    SLOTTED-Z

    Secure Insulation in One Shot.
    FAST. EASY. SECURE.

    • Integrates with all SLOTTED-ZTMcladdingattachment systems.
    • Secures insulation away fromthe waterproofinglayer.
    • Compatible with semi-rigid orrigid insulation.
    • Quick and easy to install.

    SLOTTED-Z FG with FlatTRACK110

    SLOTTED-Z products can be combined withFlatTRACK products to provide added panel attachment points.

    SLOTTED-Z FG (Fiberglass)

    Increasing Thermal Performance

    • Fiberglass has a low thermal conductivity so temperatures outside the building are not easily transferred to the interior.

    Profile

    SLOTTED-Z FG (Fiberglass)

    Profile/Insulation Depths

    1.5'' - 6''

    (½” increments)

      SLOTTED-Z AL (Aluminum)

      Increasing Thermal Performance

      • Aluminumis lightweight and strong.
      • 100%recyclable.
      • Thermally isolated THERMAShim™ provides increased.
      • thermal performance. (optional)

      Profile

      SLOTTED-Z AL (Aluminum)

      Profile/Insulation Depths

      1.5'', 2'', 2.5'', 3'', 3.5'', 4'', 4.5'', 5'', 5.5'', 6'', 7'', 8''

        ROCKETStick Insulation Securement (Optional)

        SIMPLE DESIGN

        FAST. EASY. SECURE.

        • The tapered end of the ROCKETStick slides easily into the 1”wide slot of the SLOTTED-Z.
        • Installs 1.5” above and 1” below the surface.
        • Material: Aluminum

        TYPES OF INSULATION

        • Mineral Wool (semi-rigid or rigid)
        • Foam Board (e.g. XPS, ISO)

        ADJUSTABLE

        • Simply insert the ROCKETStick in the appropriate slot to match the insulation thickness.
        • Adjusts to two positions for the depth of insulation, standard slot at the outer edge and at a1/2”increment inward from the outer flange of the SLOTTED-Z.

        ECO-Z

        Thermally Isolated Z-Girts

        ECO-Z products offer better thermal performance than traditional z-girt panel support systems and are designed to provide robust structural performance.

        ECO-Z
        Brochure

        DOWNLOAD PDF

        ECO-Z 100

        ECO-Z 200

        Increasing Thermal Performance

        Fiberglass has a low thermal conductivity so temperatures outside the building are not easily transferred to the interior. 

        Color Finishes

        Purple
        (standard)

        Black
        (custom)

        ECO-Z 100

        Improved design for greater structural performance.

        Profile

        ECO-Z 200

        Profile allows 1” ventilation behind the panel when attaching direct to the girt for rainscreen applications.

        Profile

        Product Details

        ECO-Z 100

        Product Range

        Profile Depths Available

        1.5‘’ - 6‘’

        (½”increments)

          ECO-Z 200

          Product Range

          • Insulation Depth: 1.5” – 6” (½”increments)
          • Ventilation Depth: 1” (all profiles)
          • Total Profile Depths: 2.5” – 7” (½”increments)
          • Standard Length: 10 ft. (custom sizes available)

          VENTED-ZTM

          Ventilated Rainscreen Girt +

          VENTED-Z is a uniquely designed girt system specifically for rainscreen applications. The exterior face presses back against the insulation to provide 1” of ventilation out to the façade. Compatible with all types of insulation.

          Features

          • Ventilated rainscreen system
          • Girts designed to provide 1'' airflow outside the insulation layer.
          • Additional slots for ventilation and optional insulation attachment.

          Available in:

          • Fiberglass for greater thermal performance.
          • Aluminum for greater strength.

          VENTED-Z
          Brochure

          DOWNLOAD PDF

          VENTED-ZTM Profile

          Moisture Management

          • Slotted holes - designed to divert moisture buildup on surfaces.
          • Promotes drying so the system can perform to the intended thermal specification.

          Ventilation

          Both Aluminum and Fiberglass VENTED-Z profiles are:

          • Designed with 20% airflow in the 1'' net free area between the insulation and face of the VENTED-Z.
          • Net Free Area ventilation holes may also restrict pests from entering the cavity.

          VENTED-Z FG (Fiberglass)

          Increasing Thermal Performance

          • Fiberglass is a low thermally conductive material so temperatures outside the building are not easily transferred to the interior.
          • Less expansion and contraction than traditional steel girts. (1.5 x less)

          VENTED-Z AL (Aluminum)

          Increasing Structural Performance

          • Aluminum is lightweight and strong.
          • 100% recyclable.
          • Thermally isolated THERMAShim™ provides increased thermal performance (optional)

          Product Details

          VENTED-Z FG (Fiberglass)

          Product Range

          • Insulation Depth: 1.5” – 6” (½”increments)
          • Ventilation Depth: 1” (all profiles)
          • Total Profile Depths: 2.5” – 7” (½”increments)
          • Standard Length: 10 ft. (custom sizes available)

          VENTED-Z FG Profile Specifications

          VENTED-Z FG (Fiberglass)

          Colors Available

          Purple
          (Standard)

          Black
          (Custom)

          VENTED-Z AL (Aluminum)

          Product Range

          • Insulation Depth: 1.5” – 6” (½”increments), 7'', 8''
          • Ventilation Depth: 1” (all profiles)
          • Total Profile Depths: 2.5” – 9” (insulation + ventilation)
          • Standard Length: 10 ft. (custom sizes available)

          VENTED-Z FG Profile Specifications

          VENTED-Z AL (Aluminum)

          Colors Available

          Aluminum Mill
          (Standard)

          Black Anodized
          (Custom)

          ROCKETStickTM

          Secure Insulation in One Shot

          ROCKETStick™ is an optional component that integrates with all VENTED-Z cladding attachment systems to secure insulation away from the waterproofing layer. The sculpted peg & slot insertion process makes installation quick and easy.  Compatible with semi-ridged and ridged insulation.

          SIMPLE DESIGN

          FAST. EASY. SECURE.

          • The Tapered end of the ROCKETStick slides easily into the 1” slot of the VENTED-Z.
          • Installs 1.5” above and 1” below the surface.
          • Material: Aluminum Mill

          ADJUSTABLE

          Insulation Thickness Adjustment

          • Simply insert the ROCKETStick in the appropriate slot to match the insulation thickness.
          • Adjusts in ½” increments, starting at 1.5” from the inner top flange of the VENTED-Z.

          INSULATION TYPES

          • Mineral Wool (semi-rigid or rigid)
          • Foam Board (e.g. XPS, ISO)

          SIMPLE DESIGN

          FAST. EASY. SECURE.

          • Insert tapered end into the 1” slot of the VENTED-Z.
          • Installs 1.5” above the surface and 1”below.
          • Material: Aluminum Mill

          ADJUSTABLE

          Insulation Thickness Adjustment

          • Simply insert the ROCKETStick in the appropriate slot to match the insulation thickness.
          • Adjusts in ½” increments, starting at 1.5”from the inner flange of the VENTED-Z.

          INSULATION TYPES

          • Compatible with semi-rigid or rigid board insulation.
          • Mineral Wool
          • Foam Board

          FlatTRACK

          Multi-purpose Cladding Support System

          • Interior & Exterior Applications
          • Integrated Flush-Mount Design
          • Wide Profiles for Panel Attachment

          FlatTRACK
          Brochure

          DOWNLOAD PDF

          INTERIOR

          EXTERIOR

          All Cladding Materials

          Terracotta, Stone, Brick, Ceramic, Fiber Cement, HPL/Composite, ACM, Composite, Zinc, +

          FlatTRACK 100 & 110

          Flush-Mount Design

          Independent Flush-Mounts integrate with the vertical Base Track providing:

          • Multiple fixing points on the same plane alleviates the need to connect the panel edges back into the depth of the system
          • Overall reduction in the depth of the wall assembly
          • Flexibility to place supports only where they are needed making this system ideal for even the most complex designs

          *Flush-Mount is an optional component.

          Track Finishes

          Aluminum Mill
          (standard)

          Black Anodized
          (custom)

          FlatTRACK 100

          • Strong lightweight system for shallow system configurations at ½” profile depth
          • Wide integrated profiles for seamless panel attachment
          • Optional pre-fitted Flush-Mount for 16” o.c. configurations or shallow hat profile for all other design requirements
          • Flush-Mount surface 3” or 6”

          FlatTRACK 110

          • Strong lightweight system for shallow system configurations at 1” profile depth
          • Wide 2” Base Track and 3” Flush-mounting surfaces for panel attachment
          • Standard 10’ Flush-mounting profiles can be pre-cut to desired lengths to meet engineered spacing requirements (optional)

          FlatTRACK 110

          • Strong lightweight system for shallow system configurations at 1” profile depth
          • Wide 2” Base Track and 3” Flush-mounting surfaces for panel attachment
          • Standard 10’ Flush-mounting profiles can be pre-cut to desired lengths to meet engineered spacing requirements (optional)

          Privacy          Terms of Use

          3233 Dell Ave, North Bergen, NJ 07047

          All rights reserved.  Allied Specialty Group Inc. © 2021

          3233 Dell Ave, North Bergen, NJ 07047

          All rights reserved.  Allied Specialty Group Inc. © 2021